Saturday 25 June 2011

My Key keeper Coin Purse - Part 1

Is the bottom of your handbag also a mess?
To make it easier to find my lipstick, mirror etc, I made the little purse out of Amy Butler's recent book: Style Stitches.
My fabric choice: for the exterior panel I used Ephemeral Antiquity from Michael Miller fabrics; the fabric for the band is from the paradise collection from Artgallery fabrics and for the lining I used a soft pink Liberty fabric, which is no longer available I think.
I started with the exterior part.
In step 4 on p. 96 I stitched only 1 cm from the folded edge, because I always use a 1 cm seam allowance. So, this way I was shure the band would fit properly.

The panel is folded in half RS together and stitched 2.5 cm down, 1 cm from the folded edge.
 Here , the band is placed on the main panel, RS together.
After edge stitching.
I made the second exterior panel in a similar way.
Then I constructed the lining in the same way , but added a pleat on the bottom edge as advised. The pocket was easy to make and basted to one of the main lining panels.
Here is the result:
 The main parts are now ready to be assembled, with a zipper in between.
More about that in my next post.
Enjoy the weekend.
Kristien

Monday 13 June 2011

A featured lipstick case!

I am so proud and happy!
One of my lipstick cases is the bag of the week on "Carried away: the etsy bag makers team blog"!

Here is the link. 
Kristien

Wednesday 8 June 2011

A shopping bag with a retro touch - Part 2

Now, lets move on to the outer bag.
I wanted my bag to be sturdy and able to stand on its own.
I used Vilene S 520 as reinforcement. This is a firm and fusible interfacing.

I cut this S520 1 cm smaller than the pattern, all around. This makes stitching and turning the bag easier and gives seams which are less bulky.
I fused it to the wrong side of the exterior fabric and added a layer of Vilene H 250 interfacing on top (using the complete pattern). Now I will have a bag with structure!
Next, I stitched the 2 side panels together, WSO, along the side seam.
Then it was a challenge to attach the base of the bag to the side panels.  This was probably due to the Vilene S520  attached to the base piece. Even when basted by hand and using the zipper foot, the 2 pieces slipped away. In the end I got a reasonable result. Next time , I will try another method.
I added purse feet to protect the base.



I attached the leather handles to the outer bag  by hand  , using quilting thread.
My outer bag was ready!
All there was left to do is bringing the lining and outer bag together.
I inserted the lining bag, with top edge folded down,   in the outer bag , also with a folded top edge. Both wrong sides should be facing each other. 
I carefully matched and pinned the top edges and topstitched all around, including my strap with key-hook.
As a finishing touch, I added a lovely ribbon trim.
This picture represents best the real colour of the bag.
Here is the end result:


A bag with a sea of space!
Looking back at the picture of the bag , from which I took the pattern; you see that depending on the choice of fabric, interfacing and embellishments, you get a totally different bag.
I love this one.
Kristien

Thursday 2 June 2011

A shopping bag with a retro touch - Part 1

My mam asked me to make "a red bag" for her.
I thought of making one of the bags out of the Japanese book, of which I told you in my previous post.
I took the pattern of this bag as a base:
This is a very simple, basic bag, with a  base and 2 side panels.
Although I can't read japanese, I didn't need the instructions. Also the pictures are clear.
I increased the size of the pattern with 1 cm, all around the outside of the pattern pieces and increased the height of the bag with 3 cm.
Apart from that, I added a strap with key hook , a hidden pocket closed by a zipper and I used leather bag handles.
First , I made the pocket. I used the instructions out of Lisa Lam's "Bag making bible".
If you don't have the book , there is a good tutorial on her blog: the zippered inner bag tutorial.
Here are some pictures. It is really easy to make this pocket.
 This is the back of the pocket fabric
I always use my embroidery scissors to do the fine cutting work.
 This is the front of the lining fabric, the pocket fabric has been pulled through.
 The stitched zipper from the back.
Once the second pocket piece was added, you get this view.
Now, one of the lining pieces has a zippered pocket.
Then I stitched both side lining pieces together, Wrong side out (WSO).
Once this was done, I attached the base of the bag, with the right sides facing each other
For the strap , I took a piece of interfaced fabric; 4 cm wide and a few cm longer than the height of the bag.
I folded the strap in half along the length, opened it , folded the long edges to the crease and folded again along the center crease. The strap will be 1 cm wide. I closed one of the short ends by folding the fabric inside. I threaded the D-ring of the key hook onto the strap and topstitched along both sides of the strap.
This is the result:

The lining bag is ready.
Now, it is time for the outer bag.
More about that in my next post.
Kristien
Related Posts Plugin for WordPress, Blogger...